G10W

GA10W

• Two piece construction, 12-3/4" Round
• Powder coated speaker white
• 4 mounting point
• speaker is mounted to the grill by 4 weld studs and 4 flanged pal nuts(included)
• Use this grill with a large volume back box for superior deep base response

• Same as G10W, but is torsion mount
• Torsion springs and mounting hardware provided

1. EA10

G11W, G11A, G11AW, G11SS

G11W

G11A

G11AW

G11SS

GA11W

G11W-NP

• One of the most commonly cross referenced baffles in North America
• One piece construction, 12-3/4" round
• Powder coated speaker white
• 4 mounting point
• speaker is mounted to the grill by 4 weld studs and 4 flanged pal nuts(included)

• One piece construction, 12-3/4" round
• Aluminum stamped, designed for modern esthetics, natural finish
• 4 mounting point, 4 screw & nut mount for the speaker
• G11AW is the G11A Powder coated white.

• One piece construction, 12-3/4" round
• 0.035" brushed stainless steel
• 4 stainless steel weld studs. 4 flanged nuts to mount for the speaker are also included

• Same as G11W, but is torsion mount
• Torsion springs and mounting hardware provided

• Same as G11W, but does not have any front perforation or mounting studs.
• This baffle is designed to be used as a cover

G11W, G11A, G11AW, G11SS, G11W-NP

GA11W

1. EA10
2. EA10-10L

• One piece construction, 12-3/4" Round
• Powder coated speaker white
• 4 mounting point
• speaker is mounted to the grill by 4 weld studs and 4 flanged pal nuts(included)
• Designed for the E11 enclosure, which is used for poured concrete work

1. E11

G25W

G25WNS

G25W-NP

• Highly economical design
• One piece construction, 12-1/2" Square
• Powder coated speaker white
• 4 mounting point
• speaker is mounted to the grill by 4 weld studs and 4 flanged pal nuts(included)

• Our standard G25W with a rectangular slot punched out for a call switch. CS1 Call switch sold separately.

• Our Regular G25W, without the perforation in the middle or speaker studs. Great for covering a speaker that is to be removed, or used as an access point.

Download Specification Sheet

1. E20
2. SE20SB
3. E19
4. E32

1. E20
2. SE20SB

1. N/A Usually
2. E20
3. SE20SB

G51W

• Highly economical design
• One piece construction, 12-1/2" Square
• Powder coated speaker white
• 4 mounting point
• speaker is mounted to the grill by 4 weld studs and 4 flanged pal nuts(included)

Download Specification Sheet

1. E20
2. SE20SB
3. E19
4. E32

1. E20
2. SE20SB

1. N/A Usually
2. E20
3. SE20SB

G81W

G81SW

• Surface mounted wall or ceiling enclosure, trapezoidal shaped, for 8" speaker
• Ideal for evenly spaced bi-directional sound down a long corridor
• 2 piece construction, white powder coat finish on cold rolled steel.

• Surface mounted wall enclosure, floped front, for 8" speaker
• Ideal for filling a room, from a height, over head angled
• 1 piece construction, white powder coat finish on cold rolled steel.

Download Specification Sheet

1. E50

• Standard painted head screws, Robertson drive
• 1-1/2" truss head, sheet metal screw
• Packed 100 per bag

1. N/A